Cross-linked layer by layer forward osmosis membrane

The research article Cross-linked layer by layer forward osmosis membrane for brackish water desalination has been published in Elsevier's Journal of Membrane Science.

Abstract

Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for the forward osmosis (FO) process. In this work, we report the use of a LbL surface modification strategy to fabricate a novel positively charged FO membranes. The main purpose of this work was to fabricate an effective selective layer onto a commercial PES ultrafiltration membrane, which functioned as a support layer, to provide the best performance for treatment of brackish water by FO. The new membranes containing a mixing ratio of 0.1 MPDADMAC: 0.001 MCMCNa in the polyelectrolyte complex exhibited the best performance in terms of minimum reverse solute flux and acceptable water flux as compared to that for membranes containing a mixing ratio of 0.1 MPDADMAC: 0.01 MCMCNa. The improved performance and physicochemical properties of the new membranes were explored by various analytical techniques and were compared to the pristine membrane.

Firstly, structural characterization revealed that the new selective layer was homogenous, uniform and strongly adhered to the substrate resulting in excellent water permeability and acceptable reverse solute flux. Secondly, it was found that the optimal curing temperature was 60 OC for 4 h that contributed to enhanced membrane performance. Lastly, the developed ranking protocol was adopted to optimize the membrane performance in terms of the water permeability coefficient (A) and solute permeability coefficient (B). According to this optimization procedure, the best performing membrane was membrane coated 2.5 bilayers which had water permeability and solute permeability coefficients of 23.1 L m−2 h−1 bar−1 and 1.54 L m−2 h−1 respectively.

Access the complete article on ScienceDirect.